Create your business account for discounts and other benefits. Discover more
Lithofin Splash-Stop >W<
- One-stop-shop quality brands
- Order before 2 pm, shipped the same day
- Free delivery for parcels above 150 EUR excl. VAT in Belgium and GD de Luxembourg
-
We are at your disposal for additional and professional advice
Description
Hydrophobic impregnator based on water repellent siliconate chains. The product is free of solvents, low on odour and universally usable. It is easy, quick and safe to apply, the risk of discolouration is minimised.
Properties
Lithofin Splash-Stop >W< is tolerant towards moisture in the substrate, penetrates well into absorbent surfaces and renders mineral matter water repellent. Water and dissolved dirt particles no longer penetrate the material, instead they remain on the surface. Treated surfaces stay clean longer, are less sensitive towards dirt and are easier to maintain. The water permeability (breathability) is largly maintained. The appearance of the surface is not or only slightly altered. The product is uv-resistant and does not yellow.
Durability: the treatment stays effective for up to 5 years depending on the amount applied, the type of material and the level of general wear. Once the effect starts to fade, the surface can be re-treated.
Technical Data: Density: approx. 1.0 g/cm³ pH-Value: approx. 13. Flash Point: n.a.
Appearance: colourless, clear Odour: unspecific Solubility in Water: soluble
Field of Use
For making absorbent surfaces such as granite, sandstone and other natural stones, clay and clinker tiles, concrete stone, etc. water and dirt repellent (hydrophobic treatment). Lithofin Splash-Stop >W< is suitable for indoor and outdoor use.
Please Note: not suitable for polished limestone and fresh concrete (stone).
Advice: floors should be treated with Lithofin STAINSTOP >W< or Lithofin MN Stain-Stop. These treatments will render the surface water and oil repellent, making them easier to maintain.
Directions for Use
The surface must be absorbent, clean and dry. Suitable tools: brush, roller or sprayer. Evenly apply the product and allow it to penetrate the surface. Large areas should be treated in smaller sections. On very absorbent surfaces, a second application (wet in wet) is required. Avoid puddles and streaks and remove any product excess by towelling them off after 10 minutes. The treated surface must not be rained on for 8 hours.
Please Note: non absorbent surfaces (e.g. glazed or wet surfaces) cannot be treated. The drier the surface to be treated is, the better the results will be. For optimal effectiveness, the surface must be completely dried out. Do not use when surface temperatures exceed 25°C. Glass, polished finishes, synthetics, and similar sensitive surfaces must be protected against splashes. Tools can be cleaned with water.
Drying Time: 30-60 min. (at 20°C). Treatment is fully effective after 2-3 days. Do not cover the surface during this time.
Coverage: approx. 3 m² per litre on rough sandstone, 5-8 m² on clinker, 10-25m² on granite or concrete stone depending on the surface.