Lithofin Anti-Slip Set
- One-stop-shop quality brands
- Order before 2 pm, shipped the same day
- Free delivery for parcels above 150 EUR excl. VAT in Belgium and GD de Luxembourg
-
We're at your service for additional questions and support
Description
The Lithofin Anti-Slip Set consists of a Basic Cleaner and the
Anti-Slip Fluid.
This set is suitable for making slippery ceramics, enamel and
natural stone surfaces slip resistant.
Basic Cleaner:
mildly alkaline for removing oily and greasy dirt from ceramics and natural stone. Technical Data: Density: ca. 1.0 g/cm³ pH-Value: ca. 10 Appearance: liquid, yellowish Odour: non-specific Solubility in Water: complete
Anti-Slip:
fluoride containing product for roughing ceramic and natural stone surfaces. Technical Data: Density: ca. 1,0 g/cm³ pH-Value: ca. 3 Appearance: liquid, red Odour: non-specific Solubility in Water: complete
Properties
The Lithofin Anti-Slip Fluid chemically reacts with the surface of ceramics, enamel and silicate containing natural stones. The product etches small cavities into the surface, thereby increasing the slip resistance. Suitable for indoor and outdoor use.
Field of Use
For rendering surfaces slip resistant. Especially suitable for porcelain, glazed ceramics, enamel and natural stone such as granite, gneiss, etc. This treatment also works on wet surfaces.
Directions for Use
1. Preparation: the surface must be thoroughly cleaned. Dilute Lithofin Basic Cleaner up to 1:5 with water and apply with a sponge. Vigorously scrub the surface with the rough pad on the sponge. Carefully rinse the clean surface with plenty of water to remove all product residues.
2. Treatment: first try the product on a left over tile or in an inconspicuous area in order to evaluate the effect and determine the working time. Apply Lithofin Anti-Slip to the clean and dry surface and immediately distribute the product evenly with the second sponge (wear the enclosed protective gloves). There should be a visible liquid film on the surface. During working time, repeatedly wipe and redistribute the product with the sponge, add more product if necessary. Do not allow the product to dry (Lithofin Anti-Slip only works as a liquid). Avoid foam. Continuously check the slip resistance by moving the sponge across the surface. Stop treatment when the desired effect is reached.
3. End Treatment: add water and a few drops of Lithofin Basic Cleaner to the solution on the surface, distribute immediately and wipe off the surface. Rinse well with clean water. Important, Please Note: especially the undiluted product must not come in to contact with sensitive surfaces (polished limestone, marble, lacquer, wood, carpets, etc.). Immediately wash off any splashes. Protect metals and other adjoining areas. The surface to be treated must be completely clean and free of grease and care product residues. The surface temperature should be between 10°C and 25°C during application. Switch off under floor heating. The surface is permanently altered on a microscopically small scale. Not suitable for acrylates and other plastics. High gloss and polished surfaces will become slightly less shiny. Natural stone may become lighter in colour. Always try the product prior to use.
Coverage: up to 6 m² per set.
Storage: closed and cool in well ventilated area. Up to 3 years.
