Akemi Transformer Max
- One-stop-shop quality brands
- Order before 2 pm, shipped the same day
- Free delivery for parcels above 150 EUR excl. VAT in Belgium and GD de Luxembourg
-
We're at your service for additional questions and support
Weather-resistant product for a very strong and durable colour intensification indoors and outdoors. Especially suited to adjust the colour of treated (light) edges and dripping surfaces to that of resin-treated (dark) surfaces of countertops. For natural stone, terrazzo, concrete ashlar and quartz. For brushed, glazed, fine ground and polished stone surfaces.
Protecting & Impregnating
Premium protection colour intensification
Surface
Fine-ground, Ground, Satinated, Antique, Sawn, Raugh sawn, Polished
Chemical basis
Solvent-based
Method of application
Wide brush, Pad
Material
Natural stone, Marble and limestone, Granite, Slate
Area of application
Kitchen, Bathroom & sanitary, Table & window sill, Gravestone & monument, Food area
Concentration
Ready-to-use
Disregarding the processing guidelines can lead to irreparable damage!
1. Cleaning: The surface must be clean completely dry and free from all layers. Depending on the type of stone and the degree of soiling, the following AKEMI® products are recommended: Stone Cleaner, Concrete Film Remover, Rust Remover, Wax Stripper, Algae and Moss Remover, Wax Stripper, Oil and Grease Remover Paste, Graffiti-Remover. Please pay attention to the respective technical data sheets. Rinse all surfaces well with water after cleaning. The stone must be completely dry (1 - 2 days) before treating with Transformer MAX. Optimal object temperature is 15 - 25°C (59 - 77°F). Ensure protection from rain for approx. 24 hrs. The surface must not be warmed up either by an underfloor heating or solar radiation.
2. Apply undiluted with a brush, mop or spraying device. Apply a thin, smooth layer, allowing sufficient time for the product to be absorbed by the stone.
3. Approx. 5 - 10 minutes after application, remove the excess totally with a soft and absorbent cloth. To increase the colour intensification on low absorbent stones, the product may be allowed to react for up to 60 minutes.
4. On very absorbent surfaces, several applications may be necessary in an interval of 1 to 2 hours
5. Tools can be cleaned with AKEMI® Nitro Thinner.
6. For regular cleaning, use AKEMI® Mild Stone Soap or Crystal
Clean.
