Water-based products have different properties than solvent-based products. Therefore, the application area and processing must be adapted to the changed properties.
Description
The ready-to-use special product is a modern and environmentally friendly water-based impregnation agent. It contains highly effective oil- and water-repellent additives, which provide excellent protection to the treated substrate.
Properties
Lithofin MN Vlekstop >ECO< penetrates absorbent, porous surfaces and forms an ultra-thin, invisible film in the capillaries after drying. This reduces the absorbent capacity and largely prevents water, oil, and grease from penetrating and causing stains. Contaminants thus remain on the surface, where they can be easily wiped away. No change in appearance or darkening of the treated surface has been observed to date.
Shelf life: up to 4 years depending on the type and location of the surface.
Application
As an oil-repellent protection for stain-prone surfaces such as kitchen floors and dining room floors, as well as for tables, countertops, etc. Surfaces can be polished, finely honed, or rough. Suitable for both indoor and outdoor use.
Substrate: Suitable for many types of natural stone, particularly finely honed limestone (e.g., Mocca Creme, Moleanos, etc.), calcareous sandstone (e.g., Pietra Serena), and polished, honed, and sawn limestone, as well as concrete stone.
Important: For silicate stone with a rough surface, dense limestone, and for the best possible water repellency (e.g., in showers), we recommend Lithofin MN Vlekstop (solvent-based). This also applies to resin-treated and previously treated surfaces with other products. Lithofin MN Vlekstop >ECO< can also be used as a joint aid for pre-impregnation.
Processing
Test suitability and effectiveness on a sample piece first. Surfaces must be completely dry, clean, and free of stains. Shake the bottle before use. Apply generously and evenly with a paintbrush (rough surfaces) or short-pile mop (smooth surfaces). On polished surfaces, ensure even distribution by rubbing several times. Avoid puddles and droplets, and spread or wipe immediately. No product residues should dry on the surface; wipe off excess after approx. 15 minutes before drying completely. This is especially important for unevenly absorbent surfaces to prevent unwanted gloss formation. For highly absorbent surfaces, apply several times wet-on-wet.
Drying time: approx. 20-30 minutes, walkable after 2-3 hours depending on temperature and substrate. Full effect within approx. 48 hours. Do not expose the surface to water or oil or cover it during this period.
Important: Immediately wipe splashes on wood, glass, PVC, lacquered surfaces, and durable elastic joints with a (damp) cloth. Clean tools with water.
Application temperature: The temperature of the surfaces to be treated must not be below 10°C and not above 25°C. Lower or switch off underfloor heating.
Coverage: 3-10 m² per liter, e.g., limestone: from approx. 5 m²/liter. Shell limestone approx. 9 m²/liter, polished natural stone: up to approx. 20 m²/liter.